Back to Product Page

Vinyl Deluxe Frame

Sign Backer Shape & Size:

The shape and size you would like for the sign backer.

Decorative Base:

The decorative base slides over the post creating a unique, decorative look.

R1 Panel Style:

The style of panel you would like to use for this frame.

Number and Width of Panels:

The number and width of panels you would like to use for this frame.

Post Length:

The overall height of the post. Posts over 8' must ship freight.

Arm Length:

The total length of the post arm from which your sign hangs. The 36” arm can hold up to a 24” wide sign. The 47” arm can fit up to a 36” wide sign.

Cap Style:

The cap style you would like to use.

Rider Clips:

These two clips attach to the top of the post arm to hold small rider signs such as “Under Contract.” They can fit up to a 6mm thick rider sign.


The color you would like to use.

Installation Method:

The GroundBreaker stake is better for high wind/loose soil conditions, while the Powerstake is great for normal conditions. See image for a visual example.

Post Stake:

The GroundBreaker stake is better for high wind/lose soil conditions while the Powerstake is great for normal conditions.


One installation option is using GroundBreaker stakes. These are great for temporary or often moved frames.

Substrate Thickness:

The thickness of the panel you will use with this frame.

Substrate Height:

Your overall panel height.

Substrate Width:

Your overall panel width.

Bottom Substrate Height:

Your overall bottom panel height.

Top Substrate Height:

Your overall top panel height.

Overall Substrate Width:

Your overall panel width.

Post Length Options:

The overall height of the post.

Frame Size:

Size of street name insert that will slide into frame.

Bolt Length:

Select length of bolts.

Substrate Size:

The size you would like for the substrate.

Support Channel Size:

The size you would like for the Support Channel. These are used on round poles to prevent rocking in the wind. Support Channel height typically matches the height of the sign.

Frame Style:

The frame you would like to use.

Frame Size 1:

The size you would like to use for the first frame.

Frame Size 2:

The size you would like to use for the second frame.

Stop Sign:

Select a stop sign to go with your post.

Hardware Kit:

All necessary hardware is included.

Sign Backer Size:

The size you would like for the Sign Backer. If your Stop Sign is 24", your backer should be 25". And if your Stop Sign is 30", your backer should be 31".

*Buy in bulk and save

Ships within 24 hours. FREE GROUND SHIPPING if Posts are 8' or less!

Product Description

This sign kit includes two 4” square posts that are 8’ in length, top and bottom T-rails, standard caps, and all necessary hardware. Our vinyl frames can be routed for 3MM (1/8IN), 6MM (1/4IN), 12MM (1/2IN), or 18MM (3/4IN) substrate thicknesses.

Please note that these frames are priced by panel size. The panel size and the visual space are not the same. The visual space can be calculated by subtracting 1.75” for each rail and 2” for each post. This means that you lose 3.5” total from your height and 4” total from your width. Please contact a representative for assistance or if you require more precise sizing options.

*Substrate Not Included*

Product Reviews

Write Review
  1. Vinyl Deluxe Frame

    Posted by Mark Sokolowski on 6th Oct 2021

    Everything was good except for the measurements of how far the sign went into the frame. Our customer wanted a gray 1.5" border just inside the frame. The top and bottom measurements seemed to be backwards in the instructions, so we ended up having to print the sign three different times to get it in there correctly. First one was our fault, as our designer was not paying attention that the sign goes into the frame and printed it without and sides going into the frame. Second error was due to fact we used the diminsions in the instructions,. Third version worked as was we had to remeasure how far the sign went into each side, top and bottom both ended up being 2.25", where the instructions said 1.75" on bottom and 2" on top. The frame was good, just could have had better measurements, If you buy one, wait until you get it before you print the sign, and check how much room you really have on all sides.

  2. The whole process was easy and I got it done fast

    Posted by M ramachandran on 10th Sep 2020

    Well organized web site. The lady who helped me was phenomenal. Overall pleasantly surprised

  3. Great Customer Service and Products

    Posted by BG on 25th Oct 2018

    Came as expected and expect it to make our client very satisfied with it's quality and reliability (low maintenance!).

  4. Khaki Frame

    Posted by Jill Reller on 30th Aug 2018

    This was the 1st khaki frame that I have used and I really liked how it looks. The Vinyl Deluxe Frames are always great to work with and look nice when installed.

  5. Vinyl Deluxe Frame

    Posted by Unknown on 26th Jul 2018

    The deluxe frame with the Aluminum plate works great!

  6. PVC Sign

    Posted by Tarek Eldakak on 10th May 2018

    The sign is great as always

  7. excellent

    Posted by patrick on 6th Apr 2017

    good product and service

  8. Quick & Efficient

    Posted by Fred Havens on 28th Mar 2017

    Product is a good value and I appreciated the fast shipping time getting it out the door. Everything exactly as specified and worked perfectly for the application.

  9. Very accommodating.

    Posted by Jeff on 5th Jun 2015

    Great. Everyone that I have talked to has always been.