Tenant Sign Divider for Architectural Frames
The size you would like to use.Decorative Base:
The decorative base slides over the post creating a unique, decorative look.R1 Panel Style:
The style of panel you would like to use for this frame.Number and Width of Panels:
The number and width of panels you would like to use for this frame.Post Length:
The overall height of the post. Posts over 8' must ship freight.Arm Length:
The total length of the post arm from which your sign hangs. The 36” arm can hold up to a 24” wide sign. The 47” arm can fit up to a 36” wide sign.Cap Style:
The cap style you would like to use.Rider Clips:
These two clips attach to the top of the post arm to hold small rider signs such as “Under Contract.” They can fit up to a 6mm thick rider sign.Color:
The color you would like to use.Installation Method:
The GroundBreaker stake is better for high wind/loose soil conditions, while the Powerstake is great for normal conditions. See image for a visual example.
The GroundBreaker stake is better for high wind/lose soil conditions while the Powerstake is great for normal conditions.Stakes:
One installation option is using GroundBreaker stakes. These are great for temporary or often moved frames.Substrate Thickness:
The thickness of the panel you will use with this frame.Substrate Height:
Your overall panel height.Substrate Width:
Your overall panel width.Bottom Substrate Height:
Your overall bottom panel height.Top Substrate Height:
Your overall top panel height.Overall Substrate Width:
Your overall panel width.Post Length Options:
The overall height of the post.Frame Size:
Size of street name insert that will slide into frame.Bolt Length:
Select length of bolts.Substrate Size:
The size you would like for the substrate.Support Channel Size:
The size you would like for the Support Channel. These are used on round poles to prevent rocking in the wind. Support Channel height typically matches the height of the sign.Frame Style:
The frame you would like to use.Frame Size 1:
The size you would like to use for the first frame.Frame Size 2:
The size you would like to use for the second frame.Stop Sign:
Select a stop sign to go with your post.Hardware Kit:
All necessary hardware is included.Sign Backer Size:
The size you would like for the Sign Backer. If your Stop Sign is 24", your backer should be 25". And if your Stop Sign is 30", your backer should be 31".Bottom Rider:
Select a bottom rider or none with your post.Install Method:
Choose between Grounbreaker Stakes or Frame Feet.Post Type:
The post you would like to use. Choose from square or semi-round.Panel Size:
The size of the panel you would like to use in HxW. Panel size larger than 36" must be shipped via freight.Backer Shape:
The shape of the backer you would like to use.Style:
The style you would like to use.Bracket:
The decorative bracket is made of powdercoated aluminum; it's included in the set or system.Display Board:
The display board measures 36 x 30 and comes with a Cork Insert Board.Address Options:
Select how you'd like to showcase your address. You can choose a hanging plate number or a number plate mounted at the top of the mailbox.Decorative Bracket:
You can add a white or black decorative bracket. This is installed under the arm. You cannot use the bracket together with the hanging plate number.Customization:
Enter your address in the given lines. You can use up to three lines. Leave blank any line you won't use.Gauge & Alloy:
Aluminum sheet or plate comes in either 0.063 or 0.080 gauge or thickness. Type of alloy used is 3105.Holes:
Your aluminum sheeting may come with or without holes.Setup:
Your reflective sheeting may come in single-sided or double-sided setup.Reflective Sheeting & Color:
The type of reflective material and color you'd like to use.Plate & Font Size:
The size of the plate and font you'd like to use. A 6" tall sign uses a 4" font while a 9" tall sign uses a 6" font.Border:
This street name sign has no border.Border:
This street name sign has no border.Letter Case:
The letter case you'd like to use. Choose all uppercase or a combination of uppercase and lowercase.Send Proofing:
We will send proofing before proceeding.Arrow:
Select the direction of the arrow for your sign.Background Color:
The background color for your sign.Printed Color:
The printed color for your sign.Speed Limit:
The speed limit you'd like to use.Arm End Cap:
The arm end cap you'd like to use. Choose from interior cap or exterior cap.Mailbox Color:
The color you would like to use.
Our Tenant Divider Signs for the Architetectural Frame System is designed to simplify your signage needs. It slides between 6MM or 1/4" panels, instantly creating a sleek and seamless appearance.
The Tenant Dividers are typically used in applications where panels are replaced. A common example is a commercial building with multiple tenants that change over time. While it is featured on the Architectural Frame System, it will work on all of our frame systems. However, the Architectural Frame System is the only system that allows for changing panels without uninstalling the posts.
Seamless Aesthetics: Achieve a polished and professional look with panels that seamlessly fit together, leaving no gaps or disruptions in your signage.
Easy Panel Replacement: When tenant changes occur, updating your sign is a breeze. Simply replace the panel, and your signage remains as good as new.
Choose the Tenant Sign Divider for a cost-effective, visually appealing, and user-friendly solution to your multi-panel sign needs.
There are currently no reviews for this product. Pease write a review by clicking the button below.